Powered by Blogger.

Popular Posts

Wednesday, 3 April 2013

Nokia C2-06 insert sim problem, Sim is not working in Nokia C2-06, Sim is not Valid, Single Sim is not working in Nokia C2-06



Nokia C2-06 insert sim problem, Sim is not working in Nokia C2-06, Sim is not Valid, Single Sim is not working in Nokia C2-06

Nokia C2-06 Insert sim ways problem solution jumpers
Diagnostic and Solutions.
if sim is not working in Nokia C2-06 is can be cause of water damage or missing components. Use different sim and if sim is not working then de assemble Nokia C2-06.
Once Mobile phone is disassemble check all these parts that are given in above diagram and apply electronics cleaner. Apply hot air so that it can be dry but not to much because it can damage the mother board or may can harm your skin.
these different color lines are indicating different path and tracks that are used in sim function in Nokia C2-06 so if nay of them is missing apply that jumper as shown in diagram to solve insert sim problem in Nokia C2-06
If single sim is not working out of these two you can only jumper those parts that are used by it. And to find prints and track you can see above diagram.
Warnings:
Do not apply to much heat it can damage the mother board and harm your skin.
When apply jumpers make sure the do not be ground with other prints.It can short the mobile phone.
Remove Sim Ic with hot air because with Solding iron it might can damage prints also.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
to get new repairing cellphone diagrams and applications with email "Enter your email address for RSS:" at the right side at top and press "subscribe"


--
Posted By MOHD ABDULLAH AHMED to GSM WORLD at 3/11/2013 07:02:00 PM

Nokia C2-06 Blank Lcd Display, Nokia C2-06 White Lcd Display, Nokia C2-06 Lcd Jack Damage


Nokia C2-06 Blank Lcd Display, Nokia C2-06 White Lcd Display, Nokia C2-06 Lcd Jack Damage Prints Missing.
Tools:-
To solve lcd display problem in Nokia C2-06 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-06
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.
Nokia C2-06  Lcd Display Problem Solution Ways Jumpers

Diagnosting & Solution:
After disassemble of Nokia C2-06 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
to get new repairing cellphone diagrams and applications with email "Enter your email address for RSS:" at the right side at top and press "subscribe"


--
Posted By MOHD ABDULLAH AHMED to GSM WORLD at 3/11/2013 07:05:00 PM

Nokia C2-06 Full PCB cellphone Diagram Mother Board Layout. Here is the cellphone diagram of Nokia C2-06 PCB.so i will add some more cellphone diagram in high resolution so that you can add some more repairing trick for




Nokia C2-06 Full PCB cellphone Diagram Mother Board Layout.
Here is the cellphone diagram of Nokia C2-06 PCB.so i will add some more cellphone diagram in high resolution so that you can add some more repairing trick for
Nokia C2-06 Full PCB Diagram Mother Board Layout-m

High Resolution


Nokia C2-06 if you find some new repairing techniques please must email me and i will post that diagram with your reference in this way we all make it possible "REPAIRING MADE EASY" the basic point of www.u2ugsm.com
Thanks
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
to get new repairing cellphone diagrams and applications with email "Enter your email address for RSS:" at the right side at top and press "subscribe"


--
Posted By MOHD ABDULLAH AHMED to GSM WORLD at 3/11/2013 07:09:00 PM

Nokia C2-07 MMC is not working or it do not accept memory card it can be cause of water damage and rust. It can be due to MMC jack and damage pins. And this problem can be reason of MMC I.C So lets check all these parts and try to Repair Memory card Problem in Nokia C2-07.




if Nokia C2-07 MMC is not working or it do not accept memory card it can be cause of water damage and rust. It can be due to MMC jack and damage pins. And this problem can be reason of MMC I.C So lets check all these parts and try to Repair Memory card Problem in Nokia C2-07.
Nokia C2-07 MMC Memory Card Problem Solution Ways

The above diagram have a red line to show you which parts are used in Memory Card function so check these parts and in first step try to clean them with electronics cleaner and apply some hot air to dry it.
Once it is dry check and if not working then replace this I.C to solve memory card problem in Nokia C2-07.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
to get new repairing cellphone diagrams and applications with email "Enter your email address for RSS:" at the right side at top and press "subscribe"


--
Posted By MOHD ABDULLAH AHMED to GSM WORLD at 3/11/2013 08:36:00 PM

Nokia C2-07 Mic not working, Microphone is not working in Nokia C2-07, Voice is missing and can not reach to destination Mobile Phone, Mic problem, Microphone Solution in Nokia C2-07



Nokia C2-07 Mic not working, Microphone is not working in Nokia C2-07, Voice is missing and can not reach to destination Mobile Phone, Mic problem, Microphone Solution in Nokia C2-07
Nokia C2-07 Mic Problem Solution Jumper Ways Microphone
Tools:-
Nokia T5 and T4 for disassemble.
Universal Microphone.
Electronics Cleaner.
Hot Air.
Electronics Meter.
Solding iron.
Diagnostics & Solutions:-
Before Disassemble of Nokia C2-07 make sure that mic whole in Cassing ( housing ) is opened. And here is not any dust in it. Disassemble the mobile phone and remove mic microphone from mother board with solding iron.
Check points on mother board with miter and if any value is missing check all these parts that are given in red and blue color in above diagram.If any of them is missing apply jumpers as described in above repairing picture.
Replace new mic and apply jumpers to its negative and positive points. On the mother board Red color line shows ground print and Blue line indicates positive print of mic. So this will help you to solve mic problem in nokia C2-07
Warnings:-
Apply solder on mic and Remove mic when it too hot so that mic print remain OK.
Don't apply much heat with hot air it can damage the mother board.
Assemble with focus because if mic is not in its proper place voice will not reach to destination mobile. Or you will not be able to record voice in it.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
to get new repairing cellphone diagrams and applications with email "Enter your email address for RSS:" at the right side at top and press "subscribe"


--
Posted By MOHD ABDULLAH AHMED to GSM WORLD at 3/11/2013 08:37:00 PM

Sunday, 24 February 2013

How to Master Reset a Nokia 6300 or Nokia 6301




How to Master Reset a Nokia 6300 or Nokia 6301

reset to factory settings

nokia 6300, 6301, 6301b
NOTE: Performing a Master Reset on any Cell phone will Master reset your cell phone and erase the phone completely including contacts, pictures, videos etc.


To perform a master reset on your Nokia 6300 or 6301 you will need to:

on your Nokia 6300, 6301 dial *#7780#
eneter your security code (default is 12345)

NOTE: Performing a Master/Hard Reset on any Cell phone will Factory reset/clear your phone and erase the phone completely including contacts, pictures, videos etc.
..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
http://feeds.feedburner.com/blogspot/GaEVt


--
Posted By MOHD ABDULLAH AHMED to GSM WORLD at 4/14/2012 09:36:00 PM

How to Master Reset a Nokia 5800 or a Nokia 5800 Hard Reset




How to Master Reset a Nokia 5800 or a Nokia 5800 Hard Reset

reset to factory settings
Nokia 5800 hard reset

To Nokia 5800 master reset or Nokia 5800 hard reset a Nokia 5800 :

On your Nokia 5800 Hard Reset
Press and hold GREEN + RED + CAMERA when powering up your Nokia 5800 cell phone,
Your Nokia 5800 will ask for a Master Reset code or Hard Reset code
input default 12345 security code.

Instead of a Nokia 5800 Hard Reset you can choose to perform Nokia 5800 soft reset
On your Nokia 5800 dial:
*#7370*
..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
http://feeds.feedburner.com/blogspot/GaEVt


--
Posted By MOHD ABDULLAH AHMED to GSM WORLD at 4/14/2012 09:38:00 PM

YOU MAY LIKE THIS BLOG

VISITORS

Lebels

Recent Posts

Design by araba-cı | MoneyGenerator Blogger Template by GosuBlogger